Eutech CyberScan PCD 650

Product Features Eutech CyberScan PCD650 is top-of-the-line waterproof handheld that enables concurrent measurement of pH, conductivity, dissolved oxygen and temperature, all at the same time. : : Simultaneously measures and displays four parameters : : ± 1% full scale accuracy at 3-decimal resolution across a wide measurement range : : Ion-measurement capabilities with 3-digit resolution : : Accepts two-cell and four-cell conductivity probe to measure up to 500 m/ s — meter measures pure water! : : Selectable multi-point calibration for more accurate conductivity measurements or single-point calibration for quick, convenient calibration with no mistakes : : Measures 90.00mg/ L in DO concentration and 600% in DO saturation— one of the widest dissolved oxygen measurement ranges offered in the handheld market today : : Fast and easy DO calibration with 100% calibration option against atmospheric air or 0% calibration against a zero solution : : Salinity, Temperature and Pressure Compensation— accurate readings under varying conditions : : No warm up time required with galvanic system of measurement : : One-Glance-Tells-All Screen Display with Backlight Electrode status report, calibration data and simultaneous display of up to 4 parameters : : Rugged and IP67-rated waterproof for applications in harsh environments. Meter floats on water! : : Easy-to-understand prompt messages for easy set-up, calibration and trouble-shooting : : Recorded readings individually stamped with time and date in GLP compliant format : : Auto-logging meter saves readings automatically within seconds to prevent data loss : : HI-LO limit alarm for easy quality control – Meter alerts when readings fall outside selected ranges : : Wireless Information Technology: No wires, no cables— Transfer data from meter to computer with the press of a button : : Non-Volatile Memory protects information and meter settings, even when batteries run out : : Four Levels of Password Protection prevents tampering or accidental data deletion : : Calibration Alarm: No more out-dated calibration settings Applications : Environmental: Test water quality, monitor health of aquatic ecosystems, survey surface and ground water drinking supplies, and meet EPA regulations. Water Quality Testing: For analyzing water hard water, untreated water, drinking water, effluent water, pool water and incoming process water. Ideal for all types of quality assurance and water quality testing. Industrial: For checking metal finishing, cooling tower water, printing fountain solutions, boiler water, brines, rinse tanks, ponds, pollution control, recirculating systems, waste water and industrial process systems. Useful for food analysis and quality assurance testing. Aquaculture: Use to monitor oxygen levels in catfish and shrimp farming; game stocking ponds; ornamental fish tanks and ponds; and other fish farming applications. Specifications Product Specification Description pH Range -2.000 to 20.000 pH Resolution & Accuracy 0.1/ 0.01/ 0.001 pH & ± 0.002 pH No. of pH Calibration Points 1 ( Offset) to 6 points pH Buffer Options USA, NIST, DIN, PWB, Custom mV Range ± 2000.0 mV Resolution & Accuracy 0.1 mV & ± 0.2 mV Ion Concentration Range 0.001 to 19900 Resolution & Accuracy 2 or 3 digits & ± 0.5% FS ( mono) ; 1% FS ( div) No. of Ion Calibration Pts Up to 8 DO Range 0 to 90.00 mg/ L or ppm / 0 to 600% Resolution & Accuracy 0.01 mg/ L or ppm / 0.1% ; ± 0.2mg/ L / ± 0.2% Salinity Correction Automatic Resolution & Accuracy 0.0 to 50.0ppt & 0.1 ppt Barometric Pressure Correction Automatic correction with built-in sensor Resolution & Accuracy 450 to 825 mmHg / 59.9 to 109.9 kP & 0.1 mmHg or 0.1 kPa Conductivity Range .. to 500 mS/ cm Resolution & Accuracy 0.05% FS & ± 1% FS + 1 LSD Cell Constant 0.010 to 10.000 Temperature Coefficient Linear & Pure TDS Range .. to 500.0 ppt Resolution & Accuracy 0.05% FS & ± 1% FS + 1 LSD Salinity Range 0 to 80 ppt Resolution & Accuracy 0.05% FS & ± 1% FS + 1 LSD Temperature Range -10.0 to 110.0 ° C / 14.0 to 230.0 ° F ( Meter) Resolution & Accuracy 0.1 ° C/ ° F & ± 0.5° C/ ± 0.9° F Temperature Compensation Automatic / Manual ( 0 to 100 ° C) Memory 500 Data Sets with Date/ Time stamping & Security password protection Output IrDA Wireless Communications Display Multi-data Back-lit dot matrix; 7.2 cm ( H) X 5.4 cm ( W) Special Functions Auto-Calibration; Data-logging options with time/ date indexed, GLP compliance; Simultaneous Display and measurement of 4 parameters; Cal-due alarm; pH slope/ offset Display & Self-diagnostic Power 4 X 1.5 V " AA " Alkaline batteries or 9 V DC adapter, 500 mA