HIOKI 3665-20 LAN CABLE HiTESTER

HIOKI 3665-20 LAN CABLE HiTESTER Identify the 3 most important criteria for proper networking at a glance : - Wire map check : Detect split pairs with wiring check - Cable length : Get NVP-Enhanced measurement accuracy - Direction check : Identify up to 21 cable destinations Basic specifications : Measurable cable : Twisted-pair cable 100ohm characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e and 6 Compatible connectors : RJ-45 plugs WireMap check : Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690 Detectable errors: open, short, reversed, transposed, split pairs and other miswiring Cable length check : Measurable lengths: 2 to 300 m, 6.6 to 984 ft Measurement accuracy: ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft Display resolution: 0.1 m, 0.3ft Direction check : Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04 Display : 128 x 64 dot matrix LCD ( with backlight) Functions : Auto Backlight: pressing a button turns the backlight on ( it turns off automatically after about 20 seconds) Beeper: sounds when pressing buttons and when measurement results are displayed Energy-Saving Mode: enter into energy-saving mode after measurement ( and resume when the TEST button is pressed) Auto Power Save: the 3665-20 turns off automatically about 10 minutes after the last button press Battery Check: Battery indicator blinks when voltage falls below 2.4 V Unit Switch: Select between meters or feet Power supply : Two AA-size ( LR6) alkaline batteries 1.4VA Approx. 50 hours Dimensions, mass : Approx. 85 W x 130 H x 33 D mm, approx. 160 g Accessories : TERMINATOR 9690 ( 1) CARRYING CASE( 1) ( Stores the HiTESTER 3665-20 and TERMINATORs 9690)