JENCO Dissolved oxygen, Temperature In-line Analyzer 6312DTF

JENCO Dissolved oxygen, Temperature In-line Analyzer 6312DTF Graphic LCD with manual backlight displays dissolved oxygen, temperature, relay status and transmitter current mA output simultaneously. Calibration data is stored in memory and is ready for use on power up. Two sets of isolated and reversible 4-20 mA current output for dissolved Oxygen and temperature allows it to be used as a proportional output. 4 programmable on/ off relays: 3 for dissolved oxygen and 1 for temperature. RS-485 output for remote access allows multiple units to be connected and ganged together. Password protection. IP65 Specifications Range Resolution Accuracy Dissolved oxygen ( ppm / ppb) 0.000 to 40.000ppm / 0 to 40000ppb 0.001ppm / 1ppb ± 0.2% FS Dissolved oxygen ( % ) 0.0 to 500.0% 0.1% ± 0.2% FS Temperature -10.0 to 120.0° C 0.1° C ± 0.2° C General Salinity Compensation: Manual 0.0 to 49.9ppt Pressure Compensation: Manual 600 to 4000mBar Temperature Compensation: Auto -10.0 to 80.0° C, 22K ohm NTC Output : Two current outputs for dissolved oxygen and temperature Current Output Range: 4 to 20 mA( isolated) , programmable span Current Output Scale User programmable , linear Maximum Load: 500 ohm Isolation Voltage: 500V DC Control Type: 4 ON/ OFF controls Relay Output: 5A at 115V AC or 2.5A at 220V AC, resistive load only Display 128 x 64 graphical LCD with backlight Security 4-dight password Power : 115 V AC or 230V AC at 50/ 60 HZ factory pre-set Ambient Temperature Range: From 0 to 50 ° C Weight/ Case: 950 grams / IP 65 , 1/ 4 DIN case, 148mm depth