JENCO TDS, Temperature In-line Analyzer Model 6312CTB

JENCO TDS, Temperature In-line Analyzer Model 6312CTB Graphic LCD with manual backlight displays conductivity/ TDS, temperature, relay status and transmitter current mA output simultaneously. Convenient one point calibration and calibration data is stored in memory and is ready for use on power up. Two sets of Isolated and reversible 4-20 mA current output for conductivity and temperature allows it to be used as a proportional output. 2 programmable on/ off relays conductivity. RS-485 output for remote access allows multiple units to be connected and ganged together. Password protection. Specifications Range( conductivity / TDS) Resolution( conductivity / TDS) Accuracy K= 0.01cm( exp) -1 0.000 to 9.999uS/ cm / 0.000 to 5.000ppm 0.001uS/ cm / 0.001ppm ± 0.5% FS± 1 digit 10.00 to 99.99uS/ cm / 5.00 to 50.00ppm 0.01uS/ cm / 0.01ppm ± 0.5% FS± 1 digit 100.0 to 300.9uS/ cm / 50.0 to 150.0ppm 0.1uS/ cm / 0.1ppm ± 0.5% FS± 1 digit K= 0.1cm( exp) -1 10.00 to 99.99uS/ cm / 5.00 to 5.000ppm 0.01uS/ cm / 0.1ppm ± 0.5% FS± 1 digit 100.0 to 999.9uS/ cm / 50.0 to 500.0ppm 0.1uS/ cm / 0.1ppm ± 0.5% FS± 1 digit 1.000 to 3.000mS/ cm / 0.500 to 1.500ppt 0.001mS/ cm / 0.001ppt ± 0.5% FS± 1 digit K= 1.0cm( exp) -1 100.0 to 999.9uS/ cm / 50.0 to 500.0ppm 0.1uS/ cm / 0.001ppt ± 0.5% FS± 1 digit 1.000 to 9.999mS/ cm / 0.5000 to 5.000ppt 0.001mS/ cm / 0.001ppt ± 0.5% FS± 1 digit 10.00 to 30.00mS/ cm / 5.00 to 15.00ppt 0.01mS/ cm / 0.01ppt ± 0.5% FS± 1 digit K= 10.0cm( exp) -1 1.000 to 9.999mS/ cm / 0.000 to 5.000ppt 0.001mS/ cm / 0.001ppt ± 0.5% FS± 1 digit 10.00 to 99.99mS/ cm / 0.5.00 to 50.00ppt 0.01mS/ cm / 0.01ppt ± 0.5% FS± 1 digit 100.0 to 300.0mS/ cm / 50.0 to 150.0ppt 0.1mS/ cm / 0.1ppt ± 0.5% FS± 1 digit Temperature -10.0 to 120.0 ° C 0.1° C ± 0.3 ° C General Temperature Compensation: Auto -10.0 to 120.0° C ( Thermistor, 10K ohm at 25.0 ° C) Cell Constant : 0.01, 0.1 , 1.0 , 10cm( exp) -1, 2 wire or 4 wire Reference Termperature: From 10.0 to 29.0° C, user selectable Temperature Coefficient : From 10.0 to 29 ° C, user selectable Output : Two current outputs for conducitivity and temperature Current Output Range: 4 to 20 mA( isolated) , programmable span Current Output Scale User programmable , linear Maximum Load: 500 ohm / 500V DC Control Type: 2 ON/ OFF controls Relay Output: 5A at 115V AC or 2.5A at 220V AC, resistive load only Display 128 x 64 graphical LCD with backlight Security 4-dight password Power : 115 V AC or 230V AC at 50/ 60 HZ Ambient Temperature Range: From 0 to 50 ° C Weight/ Case: 950 grams / IP 65 , 1/ 4 DIN case, 148mm depth