KYORITSU 1012

KYORITSU 1012 True RMS can measure and indicate distorted waveforms • 6040 counts with Bar Graph display • MIN/ MAX function enables to record min & max value • REL( relative value) function to indicate the measurement variation • DUTY function • Data Hold function, Auto Power Off function • Continuity with buzzer and Diode Check function • Capacity measurement of capacitors • Current ranges are protected by fuses • Designed to meet international safety standards IEC61010-1 CAT.III 300V / CAT.II 600V DC V : 600.0mV/ 6.000/ 60.00/ 600.0/ 600V ( Input Impedance: 10M© , 100M© only 600mV) | ± 0.5% ± 2dgt ( 600.0mV/ 6.000/ 60.00/ 600.0V) | ± 0.8% ± 3dgt ( 600V) AC V : 6.000/ 60.00/ 600.0/ 600V ( Input Impedance: 10M© ) | ± 1.5% ± 5dgt ( 6.000V) | ± 1.2% ± 3dgt ( 60.00/ 600.0V) | ± 1.5% ± 5dgt ( 600V) DC A : 600/ 6000µ A/ 60/ 600mA/ 6/ 10A | ± 1.2% ± 3dgt ( 600/ 6000µ A/ 60/ 600mA) | ± 2.0% ± 5dgt ( 6/ 10A) AC A : 600/ 6000µ A/ 60/ 600mA/ 6/ 10A | ± 1.5% ± 4dgt ( 600/ 6000µ A/ 60/ 600mA) | ± 2.2% ± 5dgt ( 6/ 10A) © : 600© / 6/ 60/ 600k© / 6/ 60M© | ± 1.0% ± 2dgt ( 600© / 6/ 60/ 600k© / 6M© ) | ± 2.0% ± 3dgt ( 60M© ) Continuity buzzer : 0~ 600© ( Buzzer sounds below 100© ) Diode Check : 2.8V Release Voltage: Approx. 0.4mA Test Current Capacitance : 40/ 400nF/ 4/ 40/ 400/ 4000µ F Frequency : 10/ 100/ 1000Hz/ 10/ 100/ 1000kHz/ 10MHz DUTY : 0.1~ 99.9% ( Pulse width/ Pulse period) | ± 2.0% ± 2dgt ( ~ 10kHz) Display : 6040 Counts Withstand Voltage : AC 3700V / 1min. Applicable Standard : IEC 61010-1 CAT.III 300V Pollution degree 2 IEC 61010-1 CAT.II 600V Pollution degree 2 IEC 61010-031 IEC 61326 Power Source : R6P ( 1.5V) × 2 ( Auto-power-OFF within 15 minutes) Dimensions : 161( L) × 82( W) × 50( D) mm Weight : Approx. 280g Accessories : KTL04 ( Test Lead) 0.8A/ 600V ( Ceramic Fuse) × 1built-in 10A/ 600V ( Ceramic Fuse) × 1built-in R6P × 2 Instruction Manual